Egg crate grilles, which are also known as mesh grilles, are generally used on air discharge ducts or air return ducts. The egg crate grille is produced in two types of round and square models, in addition, it is also possible to use both models inside the ceiling tile.

These grilles are produced in 0 and 45 degrees in terms of blade angle. The surface aerators of the egg crate grilles with a blade angle of 0 degrees are more than the 45 degrees type. Furthermore, the pressure drop of the 0 degrees model is less than the 45 degrees one. In 45-degree models, due to the blade angle, the visibility into the duct is lower than in the zero-degree type, and it is also possible to arrange different blades in order to direct the airflow.

Round egg crate grilles are produced in standard sizes and suitable for the ducts with diameters of 4, 6, 8, 10, 12, 14, 16, 18 and 20 inches, which can be installed with the butterfly or half plate dampers. Installing the air distribution diffuser, especially these grilles, is very important; This valve is made by automatic screws and on a wooden frame installed on the edge of the duct. As a result, it can be installed on all kinds of walls such as plaster, cement, brick, wood, etc. This grille is produced in different types of electrostatic powder coatings. Among the features of these valves, the following can be mentioned:

Installation location: wall or front of false ceiling or ceiling

Blade thickness: 0.8 mm

Material: Aluminum

Frame thickness: 1 mm

Attributes:

Very low-pressure drop to exhaust air

Air discharge control with damper

It has straight and 45-degree blades

One, two, three and four-way ventilation

Application:

Return air and evacuation of different buildings